-40%
3
3
3
3
3
3
3
3
3
3
3

3" Gaskets Silicone Rubber & Graphite Set for Vacuum Casting Perforated Flasks

$ 8.42

Availability: 96 in stock
  • Restocking Fee: No
  • Return shipping will be paid by: Seller
  • All returns accepted: Returns Accepted
  • California Prop 65 Warning: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov/ For more information go to https://www.p65warnings.ca.gov/
  • Brand: JTS
  • Country/Region of Manufacture: United States
  • Set of 2 Silicone and Graphite: Use graphite to shield Heat from Silicone
  • Condition: New with tags
  • Item must be returned within: 30 Days
  • Set of Gaskets for Vacuum Casting Flask: 3" Silicone and Graphite Gaskets
  • Refund will be given as: Money back or replacement (buyer's choice)

    Description

    SET OF GASKETS 3" for PERFORATED FLASK
    FOR VACUUM CASTING
    SILICONE
    & GRAPHITE -
    GASKETS FOR
    3"
    PERFORATED FLASKS
    -
    VACUUM SEAL FOR FLASK & ADAPTER RING
    -
    A set of 3" gaskets... High Grade Silicone and Graphite High Temperature gaskets.  Gaskets are used together to provide the best seal during vacuum casting to seal perforated flask ring and casting chamber.
    The Silicon acts as a sealing layer while the graphite placed on top of the silicone, protecting and prolonging the silicone seal from the high flask temperature.
    The combination of the 2 types of gaskets provide a very good seal, allowing the vacuum to fully pull the molten metal into the flask.
    These gaskets are die cut, have a thickness of 1/8" for the Silicone and 1/16" for the Graphite.
    Gaskets come in various diameters to work with individual flask OD sizes, visit our store.
    SPECIFICATIONS:
    JETS Product #0304-230 + 15230
    -
    Materials:
    Silicon & Graphite
    -
    Flask Diameter:
    3" - 76.3mm
    -
    Outside Diameter:
    4-1/2" - 114.3mm
    -
    Inside Diameter:
    3-3/8"  - 85.7mm
    -
    Gasket Width:
    9/16"  - 14.3mm
    -
    Thickness:
    Silicone -1/8" / Graphite 1/16"
    Item is new, Packaged - sandwiched in between cardboard to ensure safe shipping.
    VERY Fragile
    SHOULD NOT BE BENT
    Note:
    The Graphite gasket will last long and can be used as long as they are handled properly… avoiding cracking or breakage, they are subject to breakage.
    SHIPPING: Via USPS
    Visit
    JETSTOOLS
    our ebay Store to see listings for many other Lost Wax Casting Supplies and Accessories, including Casting Investment Powder, Casting and Carving Wax along with a selection of many other
    J
    ewelers
    E
    quipment
    T
    ools and
    S
    upplies
    JETSINC.
    E2 1020 CKSP